Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60
KX60 HELP! In need of rebuild!
kwakman:
you can make a case splitter. use a square piece of 8-10 mm steel, a centre hole with a thread for end of crank, and 2 threaded holes to put screws into the stator holes and voila, case entry. theres a thread on here with a pic, cant remember where tho. hopefully someone does.hth.
Motorrad:
Your local auto parts store normaly "rents" tools. Mostly they are free.. You put down a deposite, and they refund you when you return the tool...
Steering wheel pullers work great ;). With some appropriately sourced bolts.
chris-mets:
Well it's a store that sells and repairs/services on snowblowers, lawnmowers, weedwackers, leafblowers, etc. The guy there let me borrow his impact driver but I couldn't do it so I brought the engine to him and he loosened these bolts. Then I got to some more bolts that were too tight. So he did it again. Now I have more bolts that are too tight again.
chris-mets:
Ok guys. I purchased this crankshaft with a lot of needed things:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250734973233&viewitem=&sspagename=STRK%3AMEWNX%3AIT
Now I gotta get the engine apart. I have the motor off the bike and the flywheel and stator off. I have the engine phillips head bolts off that splits the engine. On the other side of the engine I can't get the clutch center bolt off or the primary gear bolt off.
kwakman:
go onto fleabay and search item number 160558022565.its a us auto place that will rent you a splitter for 5 days for 10 us dollars.sorted.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version