Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
What The Best Intake Boot to use
bruuuuup:
I used a 2000 cr250 airboot on a 09 kx250f frame and when all said and done it didnt really fit exact, It was about 1" from the carb so I used 1 of j-fabs reed spacer to help out, still had to muscle it in but it worked. So in other words dont use it!
royceymon@hotmail.co.uk:
cheers bruuuuup !
Reddy:
--- Quote from: royceymon@hotmail.co.uk on December 20, 2010, 08:45:52 AM ---hi mitch , think ill plumb for the kx250 boot and the kxf250 box , the boots quite cheap for the kx250 so ill have a go with that !
ta jerry h
--- End quote ---
Does that work? I bought a KX250 boot and couldnt get it between the shock and the frame.
In the end made a custom Ali tube and glued/fixed it to the old KXF boot. :?
jholt:
NoBody Really answered the question of which Intake boot is the best to use on the af Conversion.
Just thought that maybe someone had or could let me know what the majority of you are using for the intake boot from the air box to the carb. I thought after seeing several of these builds that there might be one common intake that worked best...
thanks
alward25:
PM JFAB or call Service Honda/Kawasaki. They could tell you best.
Good Luck
--- Quote from: jholt on December 28, 2010, 01:58:13 AM ---NoBody Really answered the question of which Intake boot is the best to use on the af Conversion.
Just thought that maybe someone had or could let me know what the majority of you are using for the intake boot from the air box to the carb. I thought after seeing several of these builds that there might be one common intake that worked best...
thanks
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version