Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
Kx500 Factory KAWASAKI FRANCE, conversion Frame HONDA CRF450
hulkteam476:
--- Quote from: cmotodad on March 27, 2013, 02:51:47 AM ---Interesting to see this post on the hyd. clutch. I have a case that has been broken by a thrown chain. I talked with a friend that bleed KTM orange and asked him to use a slave cylinder to see it could fit. I now know it does. Thanks.
--- End quote ---
calculate the distance of penetration of the slave cylinder, compare this distance with the original KX500 (ref: 13102 RELEASE-COMP-CLUTCH) and you know or weld one piece CNC.
cmotodad:
I was going to machine the case to flat and weld a piece to the case to fit the slave. After reading the response, I will try to calculate the throw and use the stock rod too.
sandblaster:
I'm thinking machine the case flat, design a nice case saver/adapter, and making a longer rod. :|
Motorrad:
--- Quote from: hulkteam476 on March 22, 2013, 11:43:53 AM ---testimonies
on the original, understand by this: KX500 Frame CRF450
I'm working on two projects already mentioned by others.
The first: the redesign of the left central carter (Addition, cnc cut) to accommodate a hydraulic Brembo clutch. dot5.1
I put a picture if that person recognizes his bike? to take contact with me.
The second, a carter removable clutch. let me your experience with pics. Thanks
--- End quote ---
That is the bike of KawSF
"Yes this is a magura,from a 300 ktm.The case has been machined to accept the magura slave cylinder"
PM me if you cant get ahold of him. Ill dig out more contact info.
http://www.kxriders.com/forums/index.php/topic,5083.0.html
hulkteam476:
--- Quote from: Motorrad on March 27, 2013, 05:20:46 AM ---
--- Quote from: hulkteam476 on March 22, 2013, 11:43:53 AM ---testimonies
on the original, understand by this: KX500 Frame CRF450
I'm working on two projects already mentioned by others.
The first: the redesign of the left central carter (Addition, cnc cut) to accommodate a hydraulic Brembo clutch. dot5.1
I put a picture if that person recognizes his bike? to take contact with me.
The second, a carter removable clutch. let me your experience with pics. Thanks
--- End quote ---
That is the bike of KawSF
"Yes this is a magura,from a 300 ktm.The case has been machined to accept the magura slave cylinder"
PM me if you cant get ahold of him. Ill dig out more contact info.
http://www.kxriders.com/forums/index.php/topic,5083.0.html
--- End quote ---
Thank you, I already searched the forum, thinking they would not be alone ...
The post in question pictures to me are not visible (018.jpeg, 012.jpeg, lift and reservoir.jpeg, hydrolic clutch 500.jpeg)
Otherwise I'll contact him directly (KawaSF) Thanks (Motorrad)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version