Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
Kx500 Factory KAWASAKI FRANCE, conversion Frame HONDA CRF450
hulkteam476:
yes! when david banner gets angry, he becomes GREEEEEN!!!!!!!!!!
motopunk:
watch out boys... the hulk stomps through the street. and throws with tanks and helicopters on you .. :-D :-D :-D :-D
what kind of pipe you have installed on your green honda?
Now I've seen everything, green hondas, Suzukis in red, and I myself have blue gasgas plastics fit on my '97 KX250 ... the same would also be feasible with yellow or red plastics on my bike. :-)
jBernard:
that bike looks awesome!
do you have any info on the brembo clutch retrofit with the slave cylinder on the side of the case?
i've got a "cable" pull brembo (drops in place of current clutch acuation) ready to put on mine but i've always wanted to do a real hydraulic setup like on the KTM's.
only thing that stopped me was the mechanical workings of them.
hulkteam476:
--- Quote from: jBernard on March 26, 2013, 05:57:12 PM ---that bike looks awesome!
do you have any info on the brembo clutch retrofit with the slave cylinder on the side of the case?
i've got a "cable" pull brembo (drops in place of current clutch acuation) ready to put on mine but i've always wanted to do a real hydraulic setup like on the KTM's.
only thing that stopped me was the mechanical workings of them.
--- End quote ---
crankcase kawa 500, seems pretty easy to change, since the original pusher is in the mechanical axis, in addition there is enough space in front of the pinion. of course
the crankcase can not have return back after modification.
The Brembo hydraulic tappet mounted on KTM's is ideal and does the same job as the original mechanical pusher kawa.
IMPORTANT this stuff, works at DOT5.1 and not Magura oil ....
Unlike the KTM 125 is seals for: oil Magura ...
If you're deceived oil, nothing works more ...
cmotodad:
Interesting to see this post on the hyd. clutch. I have a case that has been broken by a thrown chain. I talked with a friend that bleed KTM orange and asked him to use a slave cylinder to see it could fit. I now know it does. Thanks.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version