Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60

KX60 HELP! In need of rebuild!

<< < (44/122) > >>

Friar-Tuck:

  Like Um. Yea um...Sure  but like, I'm pretty sure you don't have to use a piece of glass to surface your parts!
And Ive seen your work...Sensei..

  Here is a good place for Chris to start reading about Jetting.
  http://www.kxriders.com/coppermine/thumbnails.php

  Tuck\o/ 

chris-mets:
Wow Tuck thanks so much! Im gonna go out to a store and look for the right oil for the bike. Im gonna run just regular lawnmower 32:1 oil in the bike with super gas mix. THen im gonna go out to the store and look for a 10w30...any sugestions on what one I should get? I should probably get a good break-in oil? synthetic or no? Tuck, what do you use in your kx60? THanks.

chris-mets:
Ok went to the store and got just mobil regular 10w30 and made sure it didnt say energy conserving in the circle on the back cause thats what causes clutch slippage. All I needa do is go to the gas station and get a gallon and make the mix and im ready for when the engine arrives.

Friar-Tuck:
 :-o
  Whoa there fella...The motor oil is for the Transmission...  Stop running out and buying stuff. 
             Step back from the keyboard and take a deep breath!

 The Air filter was a good Idea, not knowing what condition your present filter is in.

  We have lots to talk about. let me e-mail you and we'll get this worked out. 

I don't want to waste Dangers Bandwith.

 You can be getting the rest of your bike ready to ride.   I would like you to get a small plastic bag and wrap up the needle and slide hanging from the frame.   I didn't realize you didn't know how to disconnect it and keep it with the carb.

     Your going to need a few things you will be able to use.

  1)   A Ratio Rite Measuring cup.  This comes in handy for all kinds of things.
     
  2)  Readily available Synthetic Two Stroke Pre-Mix Oil

  Is there a motorcycle shop near you that you can get to?   If you have to you, can get oil through E-bay.

  Automotive places sell pre-mix too.    Let me/us   know what is available.  we'll find an oil that you can get easily,
   so you don't have to wait for the brown truck.

  One step at a time...

   Tuck\o/     
   

1989kawasaki:
yes make sure you get 2 stroke oil.

and i recommend you mix the gas shortly before you get the bike ready so the gas dont go old

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version