Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60
1994 KX60 rebuild/refurbish
ThrottleJunky:
Had to bead blast and paint the pipe before sending it. It looked too rough. Maybe you can polish the pro circuit tag on the pipe. It'll be trick looking then...
Coop:
--- Quote from: ThrottleJunky on July 14, 2010, 10:47:08 AM ---Had to bead blast and paint the pipe before sending it. It looked too rough. Maybe you can polish the pro circuit tag on the pipe. It'll be trick looking then...
--- End quote ---
Hey I like that idea!
Coop:
I would say it's 97% finished. I need to remove a link or two from the chain and install it, adjust the brakes, slap on a clutch perch & lever, tighten the kill switch, polish the PC plate on the pipe like ThrottleJunky suggested, add fluids and that's about it. All small stuff. Once it's "officially" done, I'll use the camera and take some nicer pictures.
Coop:
It's done! Started second kick, my nephew Zach is a witness, LOL. Followed the break in warm up and rode it easily around the yard a couple laps. It is very loud! I am going to repack the silencer tomorrow. Clutch cover gasket is also leaking a little and the shifting is sticky, you have to push the shifter down a 1/2" or so and then it will shift up into the next gear. I will have the clutch cover off tomorrow anyway so I will be able to check out the shifter mechanism. Zach insisted on the numbers, I don't like them. But it's not my bike so as long as Nick does it's all good. I have a bunch of stickers here, I am letting Nick decide which ones he wants on it and where. I will be sure to post pictures once he first see's it. Hopefully that's tomorrow.
crazyolbastard:
# 7, like bubba.
I bet he`s gunna be FAST!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version