Maintenance & Technical > KX250 / KX125
1995 kx310 fork interchange help
DR.Frankenstein:
Hello everyone I am new to this site I am working on building a kc250\310 woods bike the original fork has internal damage so my plans are to use a fork from a newer bike I have no problem changing out the triple tree if need be I also have access to a full Machine shop anyway I would like some help with what years fit what needs done to make them fit what year to use so on thanks for the help
sandblaster:
Welcome to the site DR.Frankenstein.
I'm sure there is someone on this site that has swapped the 250 forks.
I have not but here is what I can tell you.
1995 was the last year of the 43mm forks.
96-01 used 46mm
02-07 used 48mm
So, any newer fork will require a different triple clamp.
The bottom bearing 92116-1069 is the same including up to the 2015 450f.
The top bearing 92116-1076 is also the same including up to the 2015 450f.
So the question is, are the steering stems the correct length?
That I can't tell you but someone here can...
But it looks very promising...
Post some pics of your project....
DR.Frankenstein:
Thank you for the info it helps me out a lot what year fork would you recommend going with as far as Performance goes and i will get some pics up in the next day or so
sandblaster:
The newer the better... but I would stay away from air forks.
DR.Frankenstein:
I new that they used them in newer yz but I was not aware that they used them on kx
Navigation
[0] Message Index
[#] Next page
Go to full version