General > In General...
follow up jertting question for foxx4b.
Foxx4Beaver:
my local Kawie dealer had the Purple Ice....but you can get it on e-bay, amazon, etc, if your Kawie dealer doesn't carry it...
http://www.ebay.com/itm/Royal-Purple-01600-Purple-Ice-Radiator-Coolant-Additive-12-oz-Bottle-/361240509024?hash=item541b9cba60&vxp=mtr
see how it runs at low speeds with the 55 pilot and set the air screw(it should end up either side of 1 3/4 turns out)...if it doesn't start loading up or start feeling sluggish at really slow speeds, leave it with the 55.
leave the needle position where it is.
let me know what your main is.
b4himdude:
ok presently ove got the 168 in main. i do have a 170. should i put the 170 main and the 55 pilot in at the same time.? right now since its open.
?
Foxx4Beaver:
no...just put in the 55 pilot, set the air screw, then do some slow trails or just putt around and see if it loads up any.
If it still seems like it's running pretty crisp...leave it.
you should notice that it doesn't/won't get quite as warm at slow speeds with the 55 also.
b4himdude:
good thats all ive done so far. i was waiting to see what you had to say before continuing. thanks a lot. and as always ill keep you posted. thanks again.
Foxx4Beaver:
just so you know, it's best to make only one change at a time with jetting...otherwise you won't know which change made the difference if you do more than one change at a time...and it could get costly. :x
yup, let me know how it does...you're welcome.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version