Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60

Kx60 clutch problems

<< < (4/7) > >>

Paddy60:
[/URL] [/img]

Foxx4Beaver:
your pic isn't working....try this...

http://www.kxriders.com/forums/index.php/topic,10040.0.html

I've always found it easier to pull the motor to work on it....but you "shouldn't" have to, to pull the clutch cover off.
You might have to rotate the water pump impeller until the water pump drive gear aligns with the crank gear. This is where a service manual comes in handy :wink:

Paddy60:

Paddy60:
Never had these problems with dt lol

Foxx4Beaver:
try "gently" tapping the cover off with a rubber mallet, but if you feel resistance, stop!, you'll need to figure out what's holding it from coming off.
I don't think there's many guys on here that have 60's, I've never opened one up, but can't see it being much different than a 125, 250, or 500.
maybe there's someone on here that has opened one up that'll chime in...if not, I strongly suggest finding a manual.

Navigation

[0] Message Index

[#] Next page

[*] Previous page