Maintenance & Technical > KX500 Original
Stator removal??
KayEx5hunSM:
What's wrong with the PVL? Just picked up a K5 and it has a PVL on it. Let me know.
Thanks guys!
alward25:
--- Quote from: greencannon on September 07, 2010, 04:56:47 PM ---Be careful!!...stator screws are probably philips head and really soft. Strip them out and feel your blood boil from an already heated situation, been there.
I use a large philips bit to fit very snug on a small hammer type impact driver give em a light whack and they break free. If you should strip them a cutoff
wheel on a dremel rotary tool will cut a slot for a straight blade screwdriver(impact)
--- End quote ---
They are a #3 philips and most people try to remove them with a #2. But they are soft.
3Razors:
--- Quote from: KayEx5hunSM on October 17, 2010, 04:48:56 PM ---What's wrong with the PVL? Just picked up a K5 and it has a PVL on it. Let me know.
Thanks guys!
--- End quote ---
PVL works great. Don't listen to the naysayers. The fastest drag bikes in the world run them. I love mine. Use .090 btdc timing setting.
kaw rider:
i know alot of guys that use them on there cr500 and dont have problems like some of the guys with the kx500 motor.
BDI:
I think you are more apt to hear about the problems people have. It's like at work, you could do a thousand things right every day and no one ever says anything about it but if you screw up once then everyone hears about it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version