Maintenance & Technical > KX500 Original

help

<< < (2/3) > >>

stewart:
i like sudco  great place to deal with...there  41   pwk with a 55 pilot and 182  mian is what i run on my own bike that i ride  ,,and im loving it ,,,,,,,,, rideable  and fast

KXcam22:
Kiwi,
  My 92 had the pipe with the bend in it at the end of the throttle cable where it goes into the carb. Cam.

hughes:
Post some photo's of your carburator, side views, back and front views.

Hillclimb#42:
My 97 could have used the bent one. It came with reed spacer and that pushed it back under the frame. The cable pointed right up to it and actually broke on me once, while fighting it back in to the bike. My 97 has a straight one, but the replacement, (I had to buy the whole top chamber), was a smaller brass fitting. I had to go through parts boxes to get the right one. Whats the deal with those? Doesn't it depend on the throttle cable you're using too?

GDubb:
Got me curious so I went to check my carb... my 96 K5 says PWK G250 AJF2 and the throttle cable does not have the metal elbow at the top of the carb.


-G

Navigation

[0] Message Index

[#] Next page

[*] Previous page