Maintenance & Technical > KX500 Original
No spark coming out of the Big 5 hundie HT lead ?
Danger4u2:
Hope this helps,
Danger
Stator Coil Test Specifications (Clymer)
KX500
1983-1985 Ohms
Black/red to black/yellow 336-504
Red to black/yellow 14.2-21.4
White/red to black/yellow 10.4-15.6
1986
Black/red to black/yellow 432-648
White/red to white/green 4.0-6.0
1987-1989
Black/white to black/yellow 432-648
White/red to white/green 4.0-6.0
1990-on
Black/white to black/yellow 153-230
White/red to black/yellow 7.9-11.9
Ignition coil test specifications (Clymer)
Primary
KX500
1983-1986 0.85-1.15 ohms
1987 0.8-1.2 ohms
1988-1989 0.85-1.15 ohms
1990-on 0.26-0.36 ohms
Secondary
KX500
1983-1986 5.0-6.8 K ohms
1987 5.6-8.4 K ohms
1988-1989 5.0-6.8 K ohms
1990-on 2.6-3.6 K ohms
Flywheel (Rotor) Tightening Torque (Clymer)
KX500 N-m 78 ft.-lb. 58
Ignition Timing (Clymer)
KX500
1986 15deg. BTDC @ 6,000 RPM
1987-1989 17deg. BTDC @ 6,000 RPM
1990-on 19deg. BTDC @ 6,000 RPM
Danger4u2:
This might help also, make copy.
Danger
kiwikx500:
Cheers Danger4u2 top stuff! Was hoping someone might list some wiring diagrams,will be handy for future reference for other members too,it would be great to have a section on this site with wiring diagrams,exploded drawing of engine parts for each model etc,the scanner site i go to has user manuals for every uniden scanner which is handy if you are not home but near a computer, could work the same out in the bush with the K5 if something is not running right,the fault could be looked up on a wireless etc or for at home if a particular manual is not owned .
Timbowe:
There is a site on the net somewhere with the fische on it. Part numbers and all. www.bikebandit.com Check it out.
kiwikx500:
1 out of it site! Cheers for that Timbowe,will be the shiz for identifying parts :-D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version