Maintenance & Technical > KX500 Original

No spark coming out of the Big 5 hundie HT lead ?

<< < (2/4) > >>

kiwikx500:
Sounds good thanks Alan,Cheers  8-)

alan:
Ok this is what I found in the Service Manual.
1st. the coil
3 needle arching distance 7 mm or more
Primary winding resistance  1.0 Ohm (+)or(-)15 %
Secondary winding resistance  5.9K Ohm (+)or(-)15 %

Next The trouble shooting section for no spark.
No Spark: Weak Spark
Spark Plug dirty, Broken, or Maladjusted
Spark Plug cap or high tension wiring trouble
Spark Plug cap not in good contact
Spark Plug incorrect
CDI unit in trouble
ignition coil trouble
ignition coil resistor open
Flywheel Magneto Damage
Wiring shorted or open!
They forgot! Kill Switch!

Don't forget to let us know what you find, Please

Let me know if you need the CDI testing INFO?
I will have to scan it!

Alan

Danger4u2:
Make sure your battery has a full charge.
Danger

Danger4u2:

--- Quote from: Danger4u2 on May 11, 2006, 11:09:19 AM ---Make sure your battery has a full charge.
Danger

--- End quote ---
Ok guys stop looking for your battery that was a joke.
Danger

kiwikx500:
My battery alright as the electric start working great lol,BIG thumbs up to you Alan - top man as always!
I will proberly not be looking at it for a few weeks now as went to the miss work social - karting,soon as i walked in and seen the seatbelts fitted to the karts i thought bad idea,went to pass one of my partners work mates on the back straight and she did not keep her track position and forced me between her kart and some tyres,was not so much the impact but more the snap lock seatbelt that has cracked some ribs  :x,quite ironic really as i have a racing kart sitting in the garage that i have used for years with no injury,its like the dude that rides a big k5 then breaks a leg on his sons 80,will let you know when i track down the problem Alan - thanks,:-D

Navigation

[0] Message Index

[#] Next page

[*] Previous page