KX Riders
  Home Help Login Register   *
Welcome, Guest. Please login or register.
Did you miss your activation email?
April 19, 2019, 07:52:05 PM

Login with username, password and session length
Recent
[Today at 02:21:15 AM]

[Today at 02:00:54 AM]

by ftc
[Today at 12:27:45 AM]

[April 18, 2019, 08:39:09 PM]

[April 17, 2019, 08:41:40 PM]

[April 16, 2019, 03:58:01 PM]

[April 16, 2019, 03:53:10 PM]

[April 16, 2019, 12:10:30 PM]

[April 15, 2019, 11:16:35 AM]

[April 14, 2019, 01:54:28 PM]

[April 12, 2019, 07:05:26 PM]

[April 12, 2019, 07:02:08 PM]

[April 09, 2019, 09:35:24 PM]

[April 09, 2019, 09:46:51 AM]

[April 07, 2019, 04:54:24 PM]
Pages: [1]   Go Down
  Print  
Author Topic: Urgent: 2003 KX125 Rear Shock Linkage  (Read 161 times)
0 Members and 1 Guest are viewing this topic.
Devil
Newbie
*
Offline Offline

Joined: 04.15.19
Posts: 3


« on: April 15, 2019, 04:08:33 PM »

I have been looking ALL over the internet for a rear shock linkage for my 2003 KX125 I'm trying to do a ground up restore. The part number is 39007-1306. It looks like it is no longer manufactured. I have tried a local dealer, Ebay, Craigslist, Partzilla, and whatever other random websites I'm on. I also tried to find a KX250 rear swing arm and shock linkage but it is also unavailable everywhere. I'm hoping someone can point me in the right direction for a part out, or something before I have to have this custom made. THANKS!
Logged
sandblaster
Global Moderator
Hero Member
*****
Offline Offline

Joined: 09.12.10
Posts: 7,887



WWW
« Reply #1 on: April 15, 2019, 09:22:34 PM »

Has TMR been helping you on that?
I tried to help him with measurements of other parts but those bikes aren't being parted out in any great quantity,
You'll need to be patient and jump on it if you find it.
Logged

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
sandblaster
Global Moderator
Hero Member
*****
Offline Offline

Joined: 09.12.10
Posts: 7,887



WWW
« Reply #2 on: April 15, 2019, 09:29:07 PM »

If you can find one cheap enough you could take what you need and part out the rest..
I found only two for sale within 1000 miles from where I live.

https://spokane.craigslist.org/mcy/d/spokane-2003-kx-125/6867352063.html

https://inlandempire.craigslist.org/mcy/d/rancho-cucamonga-2003-kawasaki-kx125/6834728908.html

Logged

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
umberto
Administrator
Hero Member
*****
Offline Offline

Joined: 01.14.15
Posts: 2,371


First Ride 02-02-19


« Reply #3 on: April 16, 2019, 07:55:01 AM »

Is your missing, or just in bad shape?  You might be able to fix yours with a little patience, heat, and vapor blasting.  This bike was a one year wonder (rear suspension wise), and it may make it hard to find parts.  There seems to be quite a few 1999-02 bikes that are being parted out.  It might be worth your time to try the linkage off those bikes.  You can always sell it later.
Logged

Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525 - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144
umberto
Administrator
Hero Member
*****
Offline Offline

Joined: 01.14.15
Posts: 2,371


First Ride 02-02-19


« Reply #4 on: April 16, 2019, 07:56:18 AM »

Just did a search on eBay, and the 1999-02 parts are pretty scarce too.  If you have the linkage, post some pictures and let's see how bad it is.  Also, are you needing just the dog bones, or the whole linkage?
Logged

Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525 - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144
Devil
Newbie
*
Offline Offline

Joined: 04.15.19
Posts: 3


« Reply #5 on: April 16, 2019, 12:13:22 PM »

Is your missing, or just in bad shape?  You might be able to fix yours with a little patience, heat, and vapor blasting.  This bike was a one year wonder (rear suspension wise), and it may make it hard to find parts.  There seems to be quite a few 1999-02 bikes that are being parted out.  It might be worth your time to try the linkage off those bikes.  You can always sell it later.


They sure do seem to be scarce!

So I do have a damaged linkage. It has been wearing away inside one of the cylinders where the bearings would go for god knows how long. When I tore the bike apart in the first place I noticed it, so I pressed out all the bearings & bushings. It seems that 2 of the 3 cylinders are okay and I will be able to press in the new bearings. I have attached photos of the bad one. The only thing I could think of is filling it in with welds and machining the whole back to its original state. But further I also donít know the damaged cylinders correct size as the other two seem to be 1Ē and a 16th. The damaged one seems to be smaller, which Iím pretty sure is the one that connects to the rear shock.


* 9EBC3C45-AF6E-4087-B3C5-3A3058D608D9.jpeg (1485.75 KB, 4032x3024 - viewed 2 times.)

* 903D7269-A0BB-4B77-BE25-6A970B406F12.jpeg (1426.9 KB, 4032x3024 - viewed 4 times.)
Logged
umberto
Administrator
Hero Member
*****
Offline Offline

Joined: 01.14.15
Posts: 2,371


First Ride 02-02-19


« Reply #6 on: April 16, 2019, 03:36:47 PM »

If you order the bearings, you can measure the size of the other bearings and the difference in size to the hole, then use the shock bearing size to work back to how big the hole should be. I hope that makes sense.  grin
Logged

Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525 - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144
sandblaster
Global Moderator
Hero Member
*****
Offline Offline

Joined: 09.12.10
Posts: 7,887



WWW
« Reply #7 on: April 16, 2019, 08:55:36 PM »

From those pics it looks like the outer bearing is still in that hole.
Press it out, clean it up and press in a new bearing.
Logged

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
Devil
Newbie
*
Offline Offline

Joined: 04.15.19
Posts: 3


« Reply #8 on: April 17, 2019, 03:52:03 AM »

From those pics it looks like the outer bearing is still in that hole.
Press it out, clean it up and press in a new bearing.

Iím almost certain that is actually the cast aluminum damaged and created a burr along the outside edge. The bearing was probably bad and sitting on an angle wearing away the cast. But Iíll have a closer look!
Logged
ftc
Jr. Member
**
Offline Offline

Joined: 01.27.19
Posts: 27


« Reply #9 on: April 17, 2019, 08:05:24 AM »

clean it up and post another pic, i agree it looks like the outer cage is still there
Logged
sandblaster
Global Moderator
Hero Member
*****
Offline Offline

Joined: 09.12.10
Posts: 7,887



WWW
« Reply #10 on: April 17, 2019, 10:13:02 AM »

From those pics it looks like the outer bearing is still in that hole.
Press it out, clean it up and press in a new bearing.

Iím almost certain that is actually the cast aluminum damaged and created a burr along the outside edge. The bearing was probably bad and sitting on an angle wearing away the cast. But Iíll have a closer look!

Send it to me.
I'll press out the outer bearing sleeve, clean it, and send it back.
Please remove all your bearings and seals and de-grease it.

If interested, PM me, if not, no worries, I'm good  cheesy
Logged

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
umberto
Administrator
Hero Member
*****
Offline Offline

Joined: 01.14.15
Posts: 2,371


First Ride 02-02-19


« Reply #11 on: April 17, 2019, 11:30:38 AM »

From those pics it looks like the outer bearing is still in that hole.
Press it out, clean it up and press in a new bearing.

Iím almost certain that is actually the cast aluminum damaged and created a burr along the outside edge. The bearing was probably bad and sitting on an angle wearing away the cast. But Iíll have a closer look!

Send it to me.
I'll press out the outer bearing sleeve, clean it, and send it back.
Please remove all your bearings and seals and de-grease it.

If interested, PM me, if not, no worries, I'm good  cheesy
Sandblaster will make it look like new. 
Logged

Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525 - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144
KXDINO
Sr. Member
****
Offline Offline

Joined: 07.19.08
Posts: 469


« Reply #12 on: Today at 02:21:15 AM »

after you renew the bearing and you can use the bearing out of kxf which have a wax sought of stuff between the needles different part number ,new seals and sleevs are a must to reduce play and grease often, dont forget to do the swingarm bearings and bolt while your at it could save you the hassle of getting a seize bolt out later.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
TinyPortal v0.9.7 © Bloc
Valid XHTML 1.0! Valid CSS!
Page created in 0.154 seconds with 28 queries.