Still waiting on parts to come in...but was able to get the tank/seat bolts done.
My tank was missing the screw/bolt for the strap and it was rigged up with some type of allen bolt for the seat button.
For some reason - you cannot buy these bolts separate from Kawi nor do they have part numbers for them so you can even see what sizes youre dealing with.
Umberto was nice enough to provide some measurements to me so i just put together a couple bolts/nuts/washers that would work. I mounted the seat earlier to check fitment and it'll work just fine. The strap also works just fine hooked onto the washer and the frame.
Used an m6x1 40 screw with a large head, a 1" washer, and two nuts on bottom (i was going to use a spacer so it looked nicer but they were out of the spacer that fit what i needed). For the bottom i used a m6x1 25 screw with the same head and an m6 washer and it fits perfect.
I also tracked down the small oil leak and it is in the inner clutch cover. When i first did this rebuild and split that cover i noticed there were two gaskets on there - i'm assuming the reason for that was the leak. Normally i'd try and grind it down and get everything to be perfect but i'm guessing it's warped so i'll just follow suit with the two gaskets and that'll be fine. Ordered another gasket in today so i'll take that cover off in the next few days to fix that leak.
Just have to get the parts in and should have more of an update
