« previous next »
Pages: [1]   Go Down

Author Topic: New member and has a ?  (Read 10991 times)

0 Members and 1 Guest are viewing this topic.

Offline Jd88kaw

  • Newbie
  • *
  • Posts: 4
New member and has a ?
« on: August 26, 2016, 12:49:52 AM »
Hi y'all. In New to the forum but have been by looking for advice a lot so I figured why not become a member. Any way I live in Maryland, I'm 25 and have a 88 kx250 with a 89 motor, the 88 motor is gonna take a little while to fix up, the bike is In the process of being rebuilt. So for my question, I was doing some reading and a few people said that you can use the 88 cdi box with the 89 kx250 motor. Gives it a little kick in the butt/ revs a little quicker. If anybody has done this or can help me out with the 88/89 wiring I would appreciate it. Thank you
Logged

Offline Jd88kaw

  • Newbie
  • *
  • Posts: 4
Re: New member and has a ?
« Reply #1 on: August 26, 2016, 06:47:17 AM »
Anyone? Bueller. Anyone? Please
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: New member and has a ?
« Reply #2 on: August 26, 2016, 06:52:06 AM »
welcome to the site Jd!
be patient...during the middle of the day can be a tuff time for an answer/response, as most guys/gals are at work.
you could try using the sites search option...you might find some info.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline Jd88kaw

  • Newbie
  • *
  • Posts: 4
Re: New member and has a ?
« Reply #3 on: August 26, 2016, 07:33:05 AM »
Hey there! A fellow dirt biker lol. Thanks for the welcome. I thought about that when I sent it but i go to work at 4 and I'm off 2 so I'm sitting here starring at the bike. I've tired searching and wording differently but all I can find is the one thread and it's only a couple posts.
Logged

Offline sandblaster

  • Administrator
  • Hero Member
  • *****
  • Posts: 8,275
    • OEM-CYCLE QUALITY USED PARTS
Re: New member and has a ?
« Reply #4 on: August 26, 2016, 08:12:56 AM »
I've only heard whispers of it being done.
I have no direct experience.
But there are a few 250 guru's here....
Doldguy
MichyKay
And many others...
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Jd88kaw

  • Newbie
  • *
  • Posts: 4
Re: New member and has a ?
« Reply #5 on: August 26, 2016, 11:46:02 AM »
Same here. I can't find any hard evidence of it being done and how the wiring works because its definitely different wiring and I questioned whether it works because the crank is different, the cdi is etc etc etc. Like longevity wise hopefully it ain't bad for the bike.
Logged
Pages: [1]   Go Up
« previous next »