Maintenance & Technical > KX500 Original
2000 KX500 Project
Foxx4Beaver:
if it's not that bad, worst comes to worst....by all means, put it together, then get the gear later down the road...at least on the plus side of things, you don't have to pull the motor, just lay the bike on it's side, pull the clutch cover...you will have to remove the clutch basket(not a huge deal), and there ya go, it's right there...don't even need to drain the oil!...and if you're using Cometic gaskets, you can re-use it :-D
Pmcg:
Thanks Foxx I was able to get a good used one from Paul at a more than reasonable price.
Foxx4Beaver:
sweet...gotta love it when things work out!
Pmcg:
I'm hoping to finish this thing so I can ride when the weather gets a bit better here in NJ. Reading through threads I think it was Motorrad that had issues with air getting in from the PV governer. Todd rebuild and cleaned everything and it looks great but doesnt look like it seals. Is it supposed to? Heres a video
http://s129.photobucket.com/user/patmcgurrin/media/MVI_7379_zps65ccfac2.mp4.html
alward25:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version