KX Riders

Maintenance & Technical => KX500 Aluminum Frame Conversion (AFC) => Topic started by: trim on July 02, 2011, 02:43:12 PM

Title: Jetting?
Post by: trim on July 02, 2011, 02:43:12 PM

Getting close to firing it up just wondering what jetting you are running? I am 500ft above sea level run around 15-25F

Title: Re: Jetting?
Post by: Friar-Tuck on July 02, 2011, 03:01:08 PM

 :-D
  This has been very close for more guys than you can shake a stick at!  (link to team green jetting chart)

http://www.kxriders.com/forums/index.php?action=dlattach;topic=4816.0;attach=4176

  Tuck\o/

Title: Re: Jetting?
Post by: trim on July 02, 2011, 08:21:54 PM

That's close to my jetting for 0-1,000 FMF pipe Boysen Rad valve should not be too different

Title: Re: Jetting?
Post by: Friar-Tuck on July 03, 2011, 05:57:27 AM

 I'm sure you know to just take it easy, changing only one thing at a time and start with the bike in the best state of tune you can. 
Yes it is a pain, yes it takes some time and yes you will probably have to buy several jets.
   However the good news is once you know what your bike likes you will probably only change jetting twice a year!
       Well, that is unless you like to fiddle with the bike, (Guilty my own self)   
   Tuck\o/

  And remember...  Only you can prevent Exhaust Spooge...!

Title: Re: Jetting?
Post by: trim on July 04, 2011, 04:56:20 AM

I allways start on the rich side just to be changing jets is easy compared to pistons!!!!