KX Riders

Maintenance & Technical => KDX (KX step child) => Topic started by: russ on July 01, 2011, 05:11:56 AM

Title: does any one know
Post by: russ on July 01, 2011, 05:11:56 AM

i have a 1987 kdx 200 i am tryin to get the magneto off the thing on the left side of the bike, does any one have a blown up diagram of how this comes off once you have the 12 mm bolt out from the middle of it does it just pull off with a puller or is there  a retaining pin to pull it off thanks guys

Title: Re: does any one know
Post by: Friar-Tuck on July 03, 2011, 12:36:45 PM

 Sorry Russ I haven't seen your posts,
 You need a puller, they cost about 15.00
http://www.rockymountainatvmc.com/vehicleSelectProd.do?prevVehicleType=2&prevMake=2&prevModel=287&keyword=tusk+flywheel+x+1.0+left+hand+thread+puller&vehicleTypeId=2&make=2&model=287&applyFilter=Change+Vehicle&year=1997&navTitle=Engine&navType=type&webCatId=17&webTypeId=203&prodFamilyId=17329&stockId=&listingId=&uri=%2FproductDetail.do

http://cgi.ebay.com/ebaymotors/Flywheel-Rotor-Puller-KD80-KDX80-KDX200-27mm-x-1-0-LH-_W0QQcmdZViewItemQQhashZitem2a11fd7c1eQQitemZ180690451486QQptZMotorcyclesQ5fPartsQ5fAccessories