KX Riders

Maintenance & Technical => KX500 Aluminum Frame Conversion (AFC) => Topic started by: jrkawiracer on April 14, 2011, 08:17:49 AM

Title: shorty spark plug
Post by: jrkawiracer on April 14, 2011, 08:17:49 AM

does anyone know the number of a shorty sparkplug, im building a AF 250 and the plug hits the tank just a little bit and want to run a short plug

Title: Re: shorty spark plug
Post by: kxpegger on April 14, 2011, 09:44:52 AM

This is the shorty in my 500AF:

BR8ECMIX

http://www.sparkplugs.com/

Title: Re: shorty spark plug
Post by: jrkawiracer on April 14, 2011, 01:57:30 PM

does it give u good clearence at the tank??

Title: Re: shorty spark plug
Post by: kxpegger on April 14, 2011, 02:49:53 PM

With the stock tank there's good enough clearance to get the boot off and on but still a little tight. With the Clarke 3.2 gallon there's actually a lot more clearance and very easy to access the plug. My AF is an "08".

Title: Re: shorty spark plug
Post by: royceymon@hotmail.co.uk on May 06, 2011, 10:30:05 AM

try this r8 for max clearance !!!

Title: Re: shorty spark plug
Post by: sylvester on May 06, 2011, 12:36:26 PM

We warmed up the bulge in the tank with a heat gun (no open flame) and when it started to get soft, hold a wooden dowl against it just enough to clear. Allow it to cool and viola clearance. We just did this last night, search "juggernaut" here.

Title: Re: shorty spark plug
Post by: LundMx on April 19, 2013, 06:46:35 AM

is there a part # for BR8ECMIX in non iridium?