KX Riders
Maintenance & Technical => KX250 / KX125 => Topic started by: dinkyguitar on November 06, 2014, 12:52:52 AM
-
Hi All,
Does anyone know what other year kick start lever assembly will fit an 87 KX 250?
The aluminum kick lever after 27 years has a bit a play...
dinky,
-
Lick starting is very unsanitary.
-
Lick starting is very unsanitary.
oopppss.....very unsanitary :-D
correction made....
-
By parts numbers the lever, boss, and shaft are all single year fitment for 87 only .... It's hard to believe that is really the case..
-
I'm wondering if the shaft splines are the same though out the years.....but the boss is slightly different.
I checked out the kick boss on other KX 250 years and all they "seems" to be the same diameter...
dinky,
-
I'm wondering if the shaft splines are the same though out the years.....but the boss is slightly different.
I checked out the kick boss on other KX 250 years and all they "seems" to be the same diameter...
dinky,
the kx250 kickstart shafts are all similar 82-2008 ... same splines, and the change from the nut to a bolt for fixing the lever ...
i have an brandnew 2002 oem kickstartlever on my 87 kx250 and i had it also on my 83 kx250 for a short time. 2003-2008 has a diferent bending,because of the lower frame, but will also work well to the older years.. 8-)
-
Thanks motopunk!
Exactly what I was looking for...
dinky,
-
My 86 is sloppy also. I do have a herd of 03-07 KX250s in the garage so I might have to borrow one off of one of them! Just not my wifes!
-
Thanks motopunk!
Exactly what I was looking for...
dinky,
8-)... thats sometimes learning by doing and comparing parts, that i have laying around from several years...
-
My wife says she wishes my tongue was strong enough to lick start a k5. Ka zing.
-
So I finally bought a kick start lever to replace mine using all your advice.
And if anyone is interested or wondering, the one I order was for a 94-01 KX250, and it fit my 87 KX250 perfectly.
thanks again everyone,
dinky,