Maintenance & Technical > KX450F / KX250F

stripped drain plug

<< < (2/2)

ThrottleJunky:
All it takes is for someone to be a bit overaggresive and cause a big problem!

Fireypoop:
Or buy a kx500 that already has a stripped plug

royceymon@hotmail.co.uk:
dont know if any kxf owners have tried this , as the small drain bung on the 250f is begging to be stripped i drilled the bolt and use locking wire after i hand tightend very carefully with a 8mm spanner and use blue hylomar on the thread so the bolt hasnt got to be so tight..
i always use stainless steel locking wire and havnt had any problems at all with either of the bungs!

Navigation

[0] Message Index

[*] Previous page