Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60

KX60 HELP! In need of rebuild!

<< < (110/122) > >>

chris-mets:
Hey Tuck,

I put the 35 with 230 in the bike and im am very happy where it is at. There is still no powerband except 6th gear full throttle but its manageable. It still smokes but not near as much and it starts first kick again. Ill be sure to check how the spark plug looks tomorrow. I don't know what it is. What Im wondering is how did you know what spot to put the stator on when you rebuilt it? I had a picture of the exact lines where it was before it blew up. Did you put it to stock? ALso Im wondering if I took the flywheel cover off would oil pour out or does oil not go to that part of the engine?

THanks Tuck.

Chris

p.s. that kx bike forum I made is going great! I wanna see your bike, TUck, if you can!

Friar-Tuck:
 Hey Chris,
 No there won't be any oil under the cover on the flywheel / magneto side.
  The timing should be set in the stock position.  With the mild port work and no other mods to the bike I didn't think changing the timing would improve anything.
 
I think I've read your last post 7 or 8 times and am trying to figure out how the bikr revs out wide open in 6th but no powerband 1st thru 5th...
  I think you are telling me there is a lack of acceleration.
Move the clip down one notch and see if the bike needs more fuel. this will richen the mixture slightly.

With no air screw the only adjustment you have left is the needle and needle position.
  If the bike runs good wide open it may just be telling you it can take more fuel.
You may give it a try before opening up the left engine cover.
  Tuck\o/

chris-mets:
Ok good to know that I dont have to empty the oil if I open it. WHen my old phone broke, it had the exact line position of the stator as a picture on it. I might have it on my other phone though. I have to check.

I will take a look at everything tomorrow If i have extra time tomorrow.

THanks Tuck
Chris

chris-mets:
Update: I checked my old phone and it had the picture! then I opened the cover and it was exactly the same! So that means it is certainly jetting. That solved it.

THanks
Chris

chris-mets:
Oh wait I didnt check it right. I only looked at the lines and I didnt look at the arrows on the case. I will get back tomorrow to check.

Navigation

[0] Message Index

[#] Next page

[*] Previous page