Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)

Radiators when building an AF

<< < (3/3)

don46:
I use the 500 radiators and modify the mounting brackets and make a bracket for the radiator to shroud fit, If I didn't tell you they were 500 radiators you'd think they were off a 450. on the 99-02 250 conversion the 250 radiators work well.

BDI:

--- Quote from: Purpletj on December 26, 2010, 07:10:25 AM ---
--- Quote from: BDI on December 25, 2010, 06:44:34 PM ---There is an air cooled conversion we have been doing. We have a billet finned cylinder with a ceramic coating that works great . the head is built on to the cylinder so you don't have to worrie about squish or cylinder head cc or nuthin :wink: then you don't need radiators and you can use that space for a six pak of beer. You just mount you one of those little ice chest up there and stock it with your favorite beverage.we are also working on a real bitchin motor mount elimonator kit that will allow you to put any engine in any frame with zero mods.

--- End quote ---

I can't believe you forgot about the flux capacitor.

--- End quote ---
   great scott!!!!!!

boozee76:
im building a 07 kxf250 frame with kx500 motor.i,m going to use filler side radiator both sides with frame side corner cut off.just need to cut off and blank off filler.

jholt:
I am doing a 2008 KX450f to 500  I got a YZ 85 radiator and it works great the only mod you have to do is cut off the back mount on the radiator. IT does come with a filler cap on it so you could if you wanted to you could cut it off and just blank it off. The water necks line up perfect and work great.

Navigation

[0] Message Index

[*] Previous page