Commercially available service offered by members of KXRiders. > Powerdynamo Ignition w/ 100 watts of lighting
Crazy Al Racing's Powerdynamo Ignition/Lighting System.
USMC 500:
--- Quote from: SHLEPY on March 07, 2013, 02:40:02 PM ---Chuck Norris died in this weeks holocaust :-P
--- End quote ---
When Chuck Norris dies, he does it to go to hell to pick a fight and to go to heaven to give advice to the big guy...... :-D
Brute:
Chuck aside :-o I finally got the Hot Tweezers, Soldering Station and Heat Gun out today and wired the MZB/PD unit up. Thinking I will make a mount on the front forks and put the little battery behind the front headlight unit. Happy with it so far. Next is all the turn, tail, brake wiring and parts. Well, got to order them first! Doing a refi on the house, so may wait until that is done. New 42.5* bracket I made for the coil/EEC unit gives me 1/4" on both sides under the tank. I am happy!
USMC 500:
Lookin good......is there any reason you made that bracket instead of mounting directly to the stock mounting area?
Brute:
I tried bending the bracket on the coil/EEC unit and did not get enough clearance under the stock tank to make me happy. The bracket seemed pretty soft so I was worried about it moving and wearing on the tank. Put a heat sink between the unit and the new bracket and spot welded it to a cut and trimmed piece off an old BBQ, letting it cool between welds. Nice and solid now. May cut the bottom off later as it is a little long, or just may leave it. :-P Was going to run the lighting wires on the other side but am not sure now. May not look like this when it is done and done.
Charlie500:
When will they be making these to the 250's?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version