Maintenance & Technical > KX450F / KX250F

does any body know......

(1/2) > >>

Charlie500:
Will 07 kx 450 top and bottom w/stem tripple clamps work on my 06 kxf 250 frame?  :roll:

cutting torch:
First, you need to look up the bearings for both bikes. If they are the same, you might be ok...... But, there may be some tweaks needed. Here is a link to what I did that may give you some ideas.
http://www.kxriders.com/forums/index.php/topic,7396.0.html

torch

kwakman:
go to kawasaki.com/owners info/parts diagrams for some clue.wasnt the 06 a steel frame?


I was going to add a live link to your post but Kawasaki no longer has that link.  They have updated their site and it has changed, I did not spend much time but could not find the parts look up.  Here's where I buy my Honda parts and look up other parts.  It's a division of Service Honda.
http://xtremeusa.com/fiche_select1.asp?cat=Motorcycles&mfg=Kawasaki

Charlie500:

--- Quote from: kwakman on October 29, 2010, 08:15:17 PM ---go to kawasaki.com/owners info/parts diagrams for some clue.wasnt the 06 a steel frame?

--- End quote ---

the 06 250f is an AF... I'm making a 500 AF. I'm using forks off an 09 KX 250 but i think the 450 forks were bigger in diamater... I'm not sure though...

don46:
they will not mix and match, they will work, but you will have to use the triples for the forks, the 250f are Showa and the 450 are KYB

Navigation

[0] Message Index

[#] Next page