Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)

KX500af radiator hose set up

(1/1)

500donk:
Hi there, just wondering if anybody out there can help with the radiator hose setup for the KX500af I'am building. I'am using an 08 kx450f frame. I've brought radiator hoses from service honda for their kx500af's and was going to modify the 450f radiator inlets and outlets to match the service honda setup. Does anyone have a diagram or can describe the exact hose setup of the service honda kx500af? Or even suggest another setup?:?

bempa:
Hi, see http://www.kxriders.com/forums/index.php/topic,5511.msg42039.html#msg42039
You will find the information you want to know on page 12 in the attached file in that post.
Good luck and do not hesitate to ask if you need any advice.
/Bempa

500donk:
Thanks for that mate. Thats a great write up. Just need to find someone local to do the mods to the radiators now. Cheers!

jonny500:
a little off the subject but i was looking for some hoses for my k5 project and came across this stuff on ebay. i think this would do for the inverted water intake on the k5 cylinder. there are alot of other bends and sizes aviliable too, the price is good

http://cgi.ebay.co.uk/19mm-180-degree-elbow-Blue-Silicon-Silicone-hose-/330474332836?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cf1ce22a4

500donk:
That is a heap cheaper then the hoses that I brought from Service Honda. Looks like it would be a good option though if they dont kink like they say.

Navigation

[0] Message Index