Maintenance & Technical > Kx Frankensteins
YAY! KDX Build
Goat:
I ended up buying a 12 and 13 tooth front sprocket. Tried them both out and I'm liking the 12 for now. May change my mind when we get up to the race track. It's still pretty fast but now there is no clutch work to get a wheelie. Here's a new video. Still haven't found the balance point yet but I'm working on it.
http://www.youtube.com/watch?v=DPRqV1ktBFI
sandblaster:
Wow, it sounds like it is running good!
Goat:
It's running pretty good. Running 110 octane and Golden Spectro oil. Don't notice any difference in the way it runs between 93 and 110 so until I get the compression bumped up I'm gonna stick with 93 octane. I also have the jets a little rich for winter. When spring comes and it stays above 50 I'll re-jet it where it should be. The weather has been so up and down I can't jet it right. 40* one day and 10* the next. Haven't had more than 2" of snow on the ground at one time. It's been a really weird winter.
Goat:
New update! Since the 500 is down until I get a new head gasket, ball joints, and tie rods I figured why not try the kdx with the skis and paddles. We just got about 8 inches of snow last night. That put us somewhere around the 2 ft mark. Didn't think to measure before I tore it all up :P
Here is a 3 minute vid. May post a couple more. Uploading to youtube takes forever.
http://www.youtube.com/watch?v=0Ib02iSpcI0
sandblaster:
Looks like a lot of fun.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version