Maintenance & Technical > KX250 / KX125
kx250 seat
kx250.1698:
Hi guys i am planing to mod my 89 kx to a 2003. alredy have front and fenders and front and back number plate on it but i need to know i am going to buy a 2003 tank becuase i have the covers that will fit it, so i need to know if a 96 wil fit with it or do anet one maby have a seat?
Thanks
keithluneau:
The '03 tank isn't going to fit. The '89 was the last year for the old frame with the single "backbone", the newer ones have a perimeter frame with the tank between the sides.
There's a company that makes a tank to fit the 500s that uses newer shrouds, and it would be easy to fit that tank to the '89 250 if it's not already a direct fit. The pipe would be a problem though. The same company makes a special pipe to fit the 500 and works with their tank and the new shrouds. The '89 250 pipe would sit too high up to clear. You might be able to get a custom pipe made, I really don't know.
How well does the new side panels fit the '89? I'd like to see a picture! I've already ordered a newer front fender (don't remember the exact year) and a '93 rear fender to do the "straight fender mod". I had planned to stick with the old side panels, but if the new ones will fit I might look into that too.
kx250.1698:
--- Quote from: keithluneau on May 03, 2009, 06:06:40 AM ---The '03 tank isn't going to fit. The '89 was the last year for the old frame with the single "backbone", the newer ones have a perimeter frame with the tank between the sides.
There's a company that makes a tank to fit the 500s that uses newer shrouds, and it would be easy to fit that tank to the '89 250 if it's not already a direct fit. The pipe would be a problem though. The same company makes a special pipe to fit the 500 and works with their tank and the new shrouds. The '89 250 pipe would sit too high up to clear. You might be able to get a custom pipe made, I really don't know.
How well does the new side panels fit the '89? I'd like to see a picture! I've already ordered a newer front fender (don't remember the exact year) and a '93 rear fender to do the "straight fender mod". I had planned to stick with the old side panels, but if the new ones will fit I might look into that too.
--- End quote ---
Yes i know the frame difrens ext but i am going to modefy brackets and stuff to make it fit.I just need to buy a seat and need to know if 96 will go with it.
The covers fit gr8, the 2003 tail peace and side covers conect with eachother, prity kwl streight not like old 1, fenders and front number plate.
will send in about 2 weeks max a few pics becuase bike at bike shop, some one wants pics 2 becuase my kx 89 is a late moddel with upside down forks(not modded)
kx250.1698:
like Neilios he modded his to a 2000 i am going for 2003
keithluneau:
You would have to do lots of work to the tank to get it to fit the '89 frame. It's not just the brackets that are different.
This is what the '89 frame looks like: (actually a 500 frame, but very very similar to the '89 250)
Note that it's got the older style single backbone under the tank.
This is a tank that fits this type of frame, note the recess in the bottom that fits over the backbone in the frame:
Now, this is a newer style perimeter frame. Note that there is no backbone in the frame, but the two "rails" that run outside the tank:
...and this is a tank to fit this type of frame:
You can see here how the center of the tank dips down between those rails on the perimeter frame, where the backbone is on the older frames:
So it's much more than just the brackets that are different. Neilios said his tank is a one-off tank, with modified brackets on the frame. A standard run-of-the-mill tank for an '03 just isn't going to fit the '89 frame.
Don't take this the wrong way, I mean no disrespect, constructive criticism at worst. Think if it as helpful advise, and take it as just that. Don't take my word for it, but do check it out for yourself before you spend the money on a tank that isn't going to fit your bike. ;)
Navigation
[0] Message Index
[#] Next page
Go to full version