Maintenance & Technical > KX250 / KX125

88 kx 250 clutch pushrod

<< < (2/2)

campaug86:
ive tried the washers, my clutch slipped horribly. so you say the rod for a kx500 is the same for a 250?

Friar-Tuck:
 Yes the part # is the same from 1990 kx500 and the 1988 kx250.
   Part #13116  Or   Babbit SKU# 13116-1124
 Order a clutch push rod for a 1990 kx 500

Next time you go to your local shop ask the parts guy to look up the pushrod for your 1988 kx 250,  write down the part #
 Then ask him to look up a clutch pushrod for a 1990 kx 500    write it down.     (same part #)
 
Kx 500 is same # 89 to 04  never changed (to best of my knowledge)
  Tuck\o/

DoldGuy:
Tuck,

Do you have a cross reference for the part #s search (plug in a Part # and it tells you what model it fits)?? A friend use to work at the Kaw Dealership, and they had this feature, in addition to Team Green recommended specs??? Also in regards to the clutch, be sure you plates are in decent shape, otherwise this will cause issues with the Rods length. If none of the sources above can get you the push rod, PM me, I believe I have an 88 250 motor at the shop.

Friar-Tuck:
 Sorry D,
 I open up two windows from a parts supplier and compare in "notepad" or on a notepad.
 It doesn't usually take too awful long.  I have heard the dealerships do have a part # cross reference.
That would be nice.
  Tuck\o/

Navigation

[0] Message Index

[*] Previous page