Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
KX500AF It's here!
jfabmotorsports.com:
--- Quote from: AJ on November 15, 2008, 06:40:05 PM ---
--- Quote ---Very nice bike!!!! So nice that I decided to build my own
--- End quote ---
looks good!
Thanks AJ....I can't wait for the '09 MX season to thrash it!! :-D
--- End quote ---
AJ:
no doubt!
and i'm sure you'll love it..
bring on spring!
we have snow flurries here today..and just generally windy ,cold, nasty.
still, i should have went riding :(
jfabmotorsports.com:
Im in Mo. Went to GA last week to P/U an '07 450 for a doner. I took my Kx450 just in case I found a track on the way. Well I found a nice one...Big finnish line jump, 20 feet wide everywhere, and 8 inches of SAND :-(. Who would have thought. Should have taken the AF to try out.
kxpegger:
3rd ride report:
Noticed some weepage between the carb bowl and carb. Probably just needs some tightening or a new gasket. Bike still screams.
Got a pinch flat today running 18 psi. Had to limp back to the parking area about 5 miles on a flat. Probably roached the rear tire but did not bend the rim!
My personal record for flats is 3 Saturdays in a row with heavy duty tubes and rim strips and minimum 18 psi. The place I ride can be very brutal.
The bike is holding up very well!
Mick:
--- Quote from: kxpegger on November 16, 2008, 11:46:13 AM ---Got a pinch flat today running 18 psi...with heavy duty tubes and rim strips and minimum 18 psi.
--- End quote ---
http://nuetech.com/ problem solved
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version