Maintenance & Technical > KX500 Steel Frame Conversion (SFC)

Using KX500 radiators on the 99-02 KX250 frame

<< < (2/2)

JBKX:
How did your rad. shrouds fit after moving the bottoms 6mm?  Did you slot the holes in the shrouds?  Thanks for the pics.

BDI:

--- Quote from: JBKX on September 06, 2008, 02:00:21 AM ---How did your rad. shrouds fit after moving the bottoms 6mm?  Did you slot the holes in the shrouds?  Thanks for the pics.

--- End quote ---


               No the shrouds bolt right up with no moding. Because you are only moving the rad by the frame and the outer mount stays the same and so does the shroud mounting hole.

JBKX:
Thanks, I'll give it a try!!!

kawiscooter:
Has anyone doing this conversion has issues using the stock KX250 radiators? I'd like to use them if I can because my K5 donor has hammered radiators but the 2002 KX250 are like new.

What do ya'll think, will the stock 250 rads keep the K5 motor cool?

Thanks in advance!

BDI:
I'm using them and they work perfectly. :wink: I myself would only do it with the 250 rads or a custom one off set with some sweet tig welded tank's.

Navigation

[0] Message Index

[*] Previous page