Maintenance & Technical > KX250 / KX125

interesting throttle cable issue.

(1/2) > >>

dmstarr:
2006 KX250. So two weeks ago at a race, I fell over on the right side of my bike. When I got up, the throttle cable was't pulling. Turns out it pulled out of the slide.

Now, fast forward two weeks. A friend was riding a 2008 RM250 (same carb) and he had the same problem. Anyone else heard of this? Any good fixes? thanks
dave

AwfulSmokey:
I think someone put a hex on you  lol j/k  I have never heard of such a thing. Does your carb have a plastic retainer clip for the cable end?

dmstarr:
if you are talking about the white round plastic piece, then yes.

AwfulSmokey:
The only way i can see it happening is... if your cable is too long. The adjusters hold the cable tight. if they loosen the cable has play and that could happen.

This is what came to mind. i could be right i could be wrong.

KXcam22:
I have had that happen. It is rare and usually happens when the retaining clip inside the slide is not quite bottomed out in the slide and is combined with a fall and a bit too much throttle cable slack. Cam.

Navigation

[0] Message Index

[#] Next page