Maintenance & Technical > KX250 / KX125

2000 KX250 power problem

<< < (2/2)

Jeeks:
The clutch is fine and adjusted properly.  I'll have someone check the rear wheel next time I go out.

KXcam22:
You might want to verify your compression. I have been on some low compression (read worn) bikes that reved really fast but just didn't go anywhere. Cam.

Jeeks:
Well, it seems to be a traction problem.  I replaced the PC silencer with a stock one and that seemed to give a little more power through out the RPM range.  In a month or so, I plan on a top end, reeds and see if anyone messed around with the jetting.

Navigation

[0] Message Index

[*] Previous page