Maintenance & Technical > KX250 / KX125

Clutch pull question

(1/4) > >>

Alpinestars2785:
The clutch pull on my 1990 KX 250 is extremely stiff and tough to pull in compared to other models.  I recently (within the last 6-8 months) replaced the clutch basket and kit and it's still just as hard as ever.  So my question is has anyone ever used one of those Moose racing clutch pull ease devices?  It supposedly reduces the pull 20, 25, or 30 percent.  I just wanted to see if anyone had ever used one and if they work or not before i bought one.  Thanks.

Wizzy214:
i have an asv clutch lever and it helps a little but not much......it might be time to replace or lube your clutch cable!!!!
"6-8 months when you put in a new clutch basket" what does your clutch basket and clutch look like now????
how often do you change your tranny fluid???
and what fluid are you using???

The Flyin Hawaiian:
I think the Moose easy clutch lever is the same as the MSR Raptor lever with 3 different cable locations. I tried one on my 97 WR 250 and did not like it. I didnt like the bend of the lever or the clutch feel. I started using a PEP lever assy. instead. It is patterned off of a CR lever and perch with another hole drilled in it. Im pretty sure its alot cheaper too at around $45.

Alpinestars2785:
I have an ASV too, it probably is in need of some lube, as far as I know the clutch basket and clutch are fine cause they were brand new and I haven't ridden much at all since they were put in.  I usually change  the transmission oil every so many months depending on how much riding I do, if I ride more i'll change it more often and same for less.  I use Motul transmission oil 10W40 i think, but not 100% sure off the top of my head.

billygoat500:
Add 8mm to clutch arm.
I mig welded mine and it really helps.
lube the snot out of the cable

Navigation

[0] Message Index

[#] Next page