Maintenance & Technical > KX250 / KX125

Adding or changing Fork oil?

(1/2) > >>

Eric Meyer:
Are there any special tools required to add and or check the Fork oil level? Do you have to take the forks out of the trees to do so? Just looking for a few guidelines to see what I'm getting into...

Eric Meyer:
Bump Anyone?

alan:
Refer to http://www.kxriders.com/forums/index.php/topic,449.0.html Shock rebuilding.

 :-D :-D

hughes:
I find it to be best if the forks are removed from the clamps. No special tools required for changing the oil. You will need to know what oil level specs for your forks. I made a fork level gauge out of a syringe and a clear hose cut to the right length. Once the forks are drained I refill with fresh oil and then you will need to pump the fork leg up and down to purge all the air out of the system. Do you have a manual for your bike??

Arigato:
What is a synigen? :mrgreen:

Navigation

[0] Message Index

[#] Next page