Maintenance & Technical > KX250 / KX125

1979 kx125

(1/2) > >>

rmpmrace:
Been trying to set the timing on my 1979 Kx125 a5, cant get the marks to line up. Its like there's not enough travel in the stator plate. so i cant move it far enough to line things up.. I've verified that the TDC mark is correct.And with the head off I used my dial indicator to set it static. With the engine running , the timing light shows that its not advanced enough and as i said you can't move the plate far enough to get things to line up. Any ideas, help or thoughts would be appreciated. Thanks Rick

rmpmrace:
must not be to many vintage mx guys over here. just looking for a little info and or input. Thanks

KXDINO:
You need to get the service manual for the specs.

motorman455:
Are the stator wires behind the plate or through the case hung up or not long enough possibly? This happened to me on the KX500 and limited how far I could rotate the stator until I freed them.

rmpmrace:
yes I used the specs in the manual, and it said to set the marks with the piston a certain distance btdc and line the marks up but the slots in the stator plate would not allow it to go far enough. when i get home tonite i will take a couple pictures.

Navigation

[0] Message Index

[#] Next page