Maintenance & Technical > KX250 / KX125

1998 kx250 output shaft

(1/1)

Troy5157:
Recently broke a tooth off my output shaft after sprocket broke.  Cant find a decent shape output shaft off a 98 or 97 to replace with. Found a 99 but the part number is different. Only difference I can see is the number of teeth at the end of the shaft for the sprocket. Anyone else know if it will still work in a 98? Thanks

KXDINO:
if you can compare them side by side and the only difference is spline count , it will work, buy the shaft and let us all know if it doesn't resell it. the coarse splines were out , I just fitted one of mine k5 with a brand new shaft as it had a lot of sprocket movement and couldn't bare it any longer.

sandblaster:
I swapped a 99 trans into some 98 cases.
Everything swapped over with no issues but I did swap the entire trans.

Troy5157:
Ok awesome. I'll prolly buy the 99 shaft and see if it fits. If not just sell it and keep looking. Really wanna avoid welding the sprocket to the old shaft.

Navigation

[0] Message Index