Commercially available service offered by members of KXRiders. > OEM-CYCLE
2016 Pumpkin seed build...
sandblaster:
I don't know what it was originally made for... :|
Foxx4Beaver:
--- Quote from: sandblaster on October 26, 2017, 01:00:18 PM ---Your a bit behind the times Foxx lol.
--- End quote ---
no...I'm not...I've seen the Panthera thread...
what I was wondering, was if that's a common starter...or if it's one Panthera made specifically.
FL_Sharpshooter:
--- Quote from: sandblaster on October 26, 2017, 11:11:41 AM ---
--- Quote from: big green on October 26, 2017, 10:58:23 AM ---Looks awesome Mike!
--- End quote ---
Thanks guys.
The E-start mounts to where the stator cover is.
Then there is a brace to the rear of where the counter sprocket guard mounts.
--- End quote ---
Looks great. Bit of warning to you on the flywheel. I put one on my cr500 last week and noticed a rubbing sound. I thought something was out of round. After hours of measuring the flywheel and stator, I figured out the problem. ALL of the Torx screws that adapt the plate to the flywheel to accept the one-way clutch were finger-loose, which allowed the magnets to pull in the plate. Luckily I caught it and contacted Panthera. They said to use Loctite 272 and they should be torqued to 110 in-lbs. They were baffled as to how it got sent out that way :? :?
sandblaster:
--- Quote from: Foxx4Beaver on October 27, 2017, 01:42:11 PM ---
--- Quote from: sandblaster on October 26, 2017, 01:00:18 PM ---Your a bit behind the times Foxx lol.
--- End quote ---
no...I'm not...I've seen the Panthera thread...
what I was wondering, was if that's a common starter...or if it's one Panthera made specifically.
--- End quote ---
Just busting your chops.. :lol:
On the starter I have no idea... :-o
sandblaster:
--- Quote from: FL_Sharpshooter on October 29, 2017, 01:17:28 AM ---
--- Quote from: sandblaster on October 26, 2017, 11:11:41 AM ---
--- Quote from: big green on October 26, 2017, 10:58:23 AM ---Looks awesome Mike!
--- End quote ---
Thanks guys.
The E-start mounts to where the stator cover is.
Then there is a brace to the rear of where the counter sprocket guard mounts.
--- End quote ---
Looks great. Bit of warning to you on the flywheel. I put one on my cr500 last week and noticed a rubbing sound. I thought something was out of round. After hours of measuring the flywheel and stator, I figured out the problem. ALL of the Torx screws that adapt the plate to the flywheel to accept the one-way clutch were finger-loose, which allowed the magnets to pull in the plate. Luckily I caught it and contacted Panthera. They said to use Loctite 272 and they should be torqued to 110 in-lbs. They were baffled as to how it got sent out that way :? :?
--- End quote ---
Excellent info, I appreciate that.
I will double check everything before installation.
Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version