Maintenance & Technical > KX250 / KX125

1994-1998 KX250 Suspension upgrade

<< < (3/3)

kmc14:
I used the 03 kx250 two stroke swingarm. You can use the 98 linkage knuckle but the bearings are bigger than the 03. Better to get 03 knuckle so 03 bearings for entire rear suspension. My email is kx250af@gmail.com if you want to know more.i don't check site everyday.

RonWilder:

--- Quote from: sandblaster on March 10, 2017, 03:07:48 AM ---Prognostication or hyperbole???  :lol:
First... I don't have much experience with the 250's like I do with the 500's so take all this with a grain of salt..
All measurements are approximate because they vary from bike to bike

1996-1998 KX250 triple clamps have a upper clamping diameter of 53.9MM LOWER 58.9MM
The KX450F triple clamps have a upper clamping diameter of 53.8MM and LOWER 59.1MM.

The top and bottom Triple bearings fit from 92-07 KX250... So if the head tube on the frame is the same length on the 94-98 then you should be able to bolt up the 96-98 triples on to your 94.



             Do you know if the 1998 triple clamps will fit on a 1994 kx250 frame?
--- End quote ---

Navigation

[0] Message Index

[*] Previous page