Maintenance & Technical > KX450F / KX250F

Coolant fitting came out of cylinder head

(1/2) > >>

geovan5:
I have a 2006 kx250f and the fitting that the coolant hose connects to came out of the cylinder head block.  Anyone out there have this happen to them and can this be repaired or is the only repair complete replacement of the cylinder head block?

http://imgur.com/a/NDXJk

umberto:
Hi Geovan5, welcome to the site.  Can you post a picture of the damage?  Please take pictures of the fitting and the hole where it was mounted.

Here is an easy guide on how to post pictures using photobucket, which is free.  

http://www.kxriders.com/forums/index.php/topic,10040.0.html

umberto:


That's an interesting fitting.  Is it hard to put back in the hole, like it's pressed in?

umberto:
I found an excellent copy of the service manual, but it does not mention that specific fitting.  It's smooth, which tells me it's most likely a press fit.  Maybe KXDino or Alward25 can comment.  They know a lot about the four stroke models. 

Anyway, here is the manual.  I hope it helps.


http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf

Foxx4Beaver:

--- Quote from: geovan5 on September 17, 2016, 04:36:03 AM ---I have a 2006 kx250f and the fitting that the coolant hose connects to came out of the cylinder head block.  Anyone out there have this happen to them and can this be repaired or is the only repair complete replacement of the cylinder head block?

http://imgur.com/a/NDXJk

--- End quote ---

did it break off, or just pull completely out?

our member Larry Wiechman may be a good person to contact....
http://www.kxriders.com/forums/index.php?action=profile;u=2245

there's a chance, he may be able to weld it back in.

Navigation

[0] Message Index

[#] Next page