Maintenance & Technical > KX250 / KX125

01 Kx 250 need help no spark

<< < (2/5) > >>

sandblaster:
If you have a OHM meter here is the specs for your stator

While to Red 7-15 Ohms
Yellow/While to Yellow 1-5 Ohms

It would also do you good to buy a Clymer or similar service manual.
Do not buy a owners manual..

reklessj:
Hey Blaster I believe it was you that wrote up a killer thing on the electrical but maybe it was just for the K5. But it sure helped me get my issues straighten out.

sandblaster:
Yes, it was specific to the K5 but the principals are the same.
The only difference is the ohm specs and wire colors, and wire amounts :-)

NLburden:

--- Quote from: sandblaster on June 01, 2016, 01:26:15 PM ---If you have a OHM meter here is the specs for your stator

While to Red 7-15 Ohms
Yellow/While to Yellow 1-5 Ohms

It would also do you good to buy a Clymer or similar service manual.
Do not buy a owners manual..

--- End quote ---
Yes, I do have a good fluke meter, however it is a multimeter and not a analog ohm meter. Yes a service manual would be great, I normally work on offroad trucks and find the manuals are usually free online. I'll look locally for a clymer. I will let you know the readings once I get a chance, thanks!!

NLburden:

--- Quote from: sandblaster on June 01, 2016, 01:26:15 PM ---If you have a OHM meter here is the specs for your stator

While to Red 7-15 Ohms
Yellow/While to Yellow 1-5 Ohms

It would also do you good to buy a Clymer or similar service manual.
Do not buy a owners manual..

--- End quote ---
Picked up a spare set of parts from another bike that was supposively running before it was scrapped. Anyways I did some checks earlier. Do i have to remove the stator in order to do these checks or just conduct the checks from the connector with the stator still in place? I did the checks on my spare stator that i bought it turned out good. like 13 ohms and 3 ohms. I tried to check the stator that is installed in the bike and couldn't get any resistance from the pins in the connector.  Wasn't getting any resistance at all.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version