Maintenance & Technical > KX250 / KX125

KX250 1998 stator

(1/2) > >>

badmoosecycles:
Mine is bad. :( Flywheel got loose from the thing and broke it.
Does anyone know how to rewire this?
Pleez help.. Need to go ride..
I got an new flywheel form an 01 bike and i think its ok for 98?
Cost 80euros in fi and don't have the money for a stator and haven't even fount one.
are the kx125 stators compatible to the 250?

badmoosecycles:
Are you shure you got those wire colours right?

92-97 KX250 STATOR SPECS
White/Red to White/Green 396-594 ohms
Red to Black/Red 288-432 ohms
White to Red 14-21 ohms

98 KX250 STATOR SPECS
White/Red to White/Green 396-594 ohms
Red to Black/Red 288-432 ohms
White to Red 14-21 ohms

00-01 KX250, 00 KX125 STATOR SPECS
While to Red 7-15 Ohms
Yellow/While to Yellow 1-5 Ohms

sandblaster:
Do you have a service manual?
If so, compare what it says and let me know.

badmoosecycles:
-98 with the hard wired stator to the wiring harness doesn't have a black wire.
That pic is form a -98, i rewired the yellow to white/yellow and got resistance of 2.7ohms
it was 120 turns per pole. 0.45mm wire. The second section was 220 turns per pole with 0.35mm wire, BUT i RAN OUT OF WIRE AFTER THE SECOND pole!!  :cry:
so i made 440 turns wrists hurting and looked to my "wirespool" :D i got the wire from a pro who rebuilds electric engines. Guess my bike won't be running tonight!!
DÄÄÄÄÄÄÄM!!!!

badmoosecycles:
Is there a shop manual for the -98 kx250 some where?

Navigation

[0] Message Index

[#] Next page