Maintenance & Technical > KX500 Steel Frame Conversion (SFC)

2002 sfc clutch cable issue

(1/2) > >>

MessyJesse69:
So what cables are you guys using? The one i have barley works and the adjustments are all the way out. Any ideas? Also if anyone has an answer for my fuel problem? I molded the stock tank but short of molding and oversized tank i have no other ideas.

Suva:
I was able to run a 250 cable.  Had to try a couple diff routings and trim/sand down the adjuster screw deal to give the cable enough play

umberto:
I had that same issue with mine at first.  I ended up using a stock replacement 89 and up KX 500 clutch cable.  I did bend the tube a little bit to make it follow the 250 cable path more closely.

MessyJesse69:
Thanks, bike has been a work in progress for way too long its time to get it race ready. Anyone done an sfc with an oversized tank??

umberto:
zz3gmc has, but his was an 04 model.  He used an IMS tank, but did have to do some heating and shaping.  What year is your bike?

Navigation

[0] Message Index

[#] Next page