Maintenance & Technical > KX250 / KX125
KX250 power valve
GRARA:
Looking for some much needed help here....after much confusion it turns out ive a 94 KX250 engine in my 98 frame...can anyone help me here what year power valves fit this...was there a set that fitted multiple years? The reason im asking is i ordered a full set from ebay and it stated they fit years 94 - 98, but the are smaller (thinner) than the valves that were originally in the bike????
My head is bursting here
SOHC:
What are the part numbers?
1993-94 KX250 - 12005-1182 Left
1993-94 KX250 - 12005-1183 Right
GRARA:
SOHC thanks for the reply they were used power valves so ive no idea about the part numbers..
sandblaster:
I don't know how you figured out what year your engine is but remember, multiple years of cylinders will swap on multiple years of lower ends.
So, if you need exhaust valves, be sure you buy them to fit the cylinder.
If your cylinder is a 1994 (Good year) you should have 1722 cast on the side of it.
If you have any other number on the side of your cylinder tell me what it is or go here and look up the numbers under the cylinder:
http://oem-cycle.com/KAWASAKIKX250BIKEID.shtml
LukeG:
In 99 the diameter of the side vavles was reduced from 20.7mm to 16.7mm. 93 to 98 are the ones you are after, but be aware that they are no longer available especialy the LH one. I managed to find a new RH valve on ebay, so keep an eye out.
Navigation
[0] Message Index
[#] Next page
Go to full version