Maintenance & Technical > KX250 / KX125
kx250 prob after rebuild
KawasakiRipper:
Ok what about this one?
https://www.youtube.com/watch?v=FOIbhIo3GCU
Foxx4Beaver:
--- Quote from: KawasakiRipper on June 28, 2015, 09:08:10 AM ---and also foxx when i look in into the exhaust port, i just give it throttle to see if its fully functioning? thanks
--- End quote ---
you won't be able to have it running when you look into the exhaust port, because you'll need to have the pipe removed.
before you remove the pipe, start it 1st, with that plastic cover off, like you have shown in the pic...if that mechanism moves when you rev it up, you'll know it's working to some extent....but you won't know if they're timed correctly...that's when you take the pipe off, and look up into the cylinder while manually operating the KIPS by hand, and see if they're closed completely, and opening completely....and more importantly, correctly.
Foxx4Beaver:
--- Quote from: KawasakiRipper on June 28, 2015, 09:13:09 AM ---Ok what about this one?
https://www.youtube.com/watch?v=FOIbhIo3GCU
--- End quote ---
is that your bike in that video?
yes just like that...that appears to be functioning fully...but we don't know if they're timed correctly.
KawasakiRipper:
No its not my bike but my bike has that same governor cover right there, i remember it when i was putting powervalve back together, i was just worried that a rod would shoot out or something once i take that cover off
Foxx4Beaver:
nothing will fly out...and you want to see yours come out at least that far too when you rev it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version