Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)

Newbie building an 06 KX450f with 93 KX250 engine

(1/3) > >>

A.Frame187:
Just signed up today. I have this bike I'm building, I bought it already started and am trying to figure out carb/airbox connection.. Does anyone have any insite on it? Obviously its been done plenty of times.. The top of the carb is even with the bottom of the airbox boot.
Any help would be greatly appreciated. I've done many snowmobile power transplants, but this is my first bike.
I'm sure I'll have other questions along the way..
Thanks Aaron

umberto:
Can you post some pictures of what you are working with?  If you've never done it, here is a step by step guide on posting using Photobucket which is free to use.

http://www.kxriders.com/forums/index.php/topic,10040.0.html

sandblaster:
Hey A.Frame187, welcome to the forum.
I've played around with several boots and I have decided on a 2000 CR250 air box boot for my conversion.
It is shown on the right side of the pic.



The boot will have KZ3T on the side of it.
A lot of sellers mix them up.

You will need to make an aluminum adapter for it.

A.Frame187:
[/img]

Hope this works. That 2000 cr boot may be the option I need Sandblaster. What front pipe are you using on your bike?

Thanks for the help guys.

sandblaster:
Hmmmm.... mine doesn't fit like that.
I need to take a double look at mine later today.

Navigation

[0] Message Index

[#] Next page