Maintenance & Technical > KDX (KX step child)

1991 kdx200 front forks

<< < (2/3) > >>

jostan:
Well i am going to get some pictures up tommorow so someone might be able to get me some kind of idea of what they came up with. i will look for numbers but i didnt really see any.

jostan:
How do you post pictures. i have them saved to my desktop.

thanks for help.

Joe

Foxx4Beaver:

--- Quote from: jostan on January 04, 2015, 04:56:30 AM ---How do you post pictures. i have them saved to my desktop.

thanks for help.

Joe




--- End quote ---

try this thread...

http://www.kxriders.com/forums/index.php/topic,10040.0.html

jostan:


I was having problems with my carb it was leaking and thought i had it fixed. the hose that you see leaks when the bike is running and i need to know what is. i should have the book in 2 weeks just looking for some help.

Know i am trying to figure out what forks these belong to. they are no original and it dost come from a 92 the caliper dost line up with the wholes.






Thanks for all the input.

Goat:
That hose is just a vent tube. I have never had one leak anything. Is the trans over filled with oil?

Forks could be from anything from the late 80's like 125, 250, 500, or even a klx. Definitely not kdx cuz it doesn't have the trip meter gear housing provision. Measure the diameter of the chrome tube and we can start to narrow it down from there.

If you want to put it back to factory forks I do have everything except the cable and trip meter off a 91. Forks need new seals and oil. front wheel/hub is in good shape. Bearings seem to be useable but personally I would put new ones in since they are cheap. trip meter gear housing is in great shape after I cleaned all the grease and dirt out of it. Axle is also in good shape. Triple tree is clean, bearings may clean up and work just fine but they are covered in dirty grease and don't roll very good at the moment. Everything is out in the shed on a shelf.

Navigation

[0] Message Index

[#] Next page

[*] Previous page