Maintenance & Technical > KX100 / KX85 / KX80 / KX65 / KX60

kx65 wiring questions

(1/2) > >>

btylerb:
ok so i have a 2003 kx65, just put a fresh top end on it, i mean i havent even done the break in yet, but theres my problem, i put it through one heat cycle just fine, let it cool down went back out and tarted up firt kick perfectly, but this time it idled for about 2 minutes then it back fired and shut off, wouldnt crank again so i took the park plug out to check for spark and i have none, i ruled it down to a bad stator but i started looking up 2003 kx65 stators and i think i might off a wrong one on or somethin cuz next i looked at the cdi's and new cdi's look completely different compared to what i have, ill posst pics right after this, so can some one help i mean it started up with it but would it matter? would this cdi or stator cause it to lose spark?

btylerb:
heres ones on ebay that i guess are the right ones : http://www.ebay.com/itm/Kawasaki-KX-65-Off-2003-KX65-cdi-igniter-/261005363812?pt=Motorcycles_Parts_Accessories&hash=item3cc521ca64&vxp=mtr

then heres mine:

heres the plug ins

sandblaster:
If you are in the USA, look at your VIN.
Count 10 digits reading left to right and tell us what the 10th digit is.

alward25:
did you try a new plug first?  might have fouled, silly question, trying to paint a picture :wink:

btylerb:
bought a brand new plug just for the rebuild, and the 10th digits a 3, looked up the cdi and it belongs to a kx60, does that make a difference

Navigation

[0] Message Index

[#] Next page