Maintenance & Technical > KX500 Steel Frame Conversion (SFC)

steel frame head mounts

(1/6) > >>

yeomans:
Hey all,
Just was looking to see if someone could offer up some fresh inspiration for a head mount on a 99-02 250/500 conversion.
I have an idea in mind, but I would like to see what others have come up with.
I know in the past there were a couple photos floating around on sf builds.
Anybody got anything cool? billet? a cad drawing?

sandblaster:
This is the mount you can get from JFAB.



It was made for a steel frame conversion.
I adapted it for my AF/

yeomans:
Thats very close to what I was planning on doing.
I had saw something similar posted here a few years ago.
My only issue is that I'm using the 86-88 motor in this build.
I do like that bracket that could be welded onto the frame,if it was steel, I would just have to adapt the plate to the hole pattern on the heads of the 86-88's.

motopunk:

86 kx500 engine in 93 250 frame ..

i used the 3 headstuds in the front to bolt on the headstay and handmade brackets to the both holes in the frame  ... 

yeomans:
Yeah, I was also  thinking it would be best to make use of the two stock holes. I don't have any nice square tubing at that point on the frame to weld one of those style mounts on.

Navigation

[0] Message Index

[#] Next page